Having a pool is a great addition to any home, providing endless entertainment and a refreshing way to cool off during the hot summer months. However, like any mechanical system, pool pumps can sometimes encounter issues that need to be addressed. One common problem that pool owners may face is the presence of air in the pump system. If you’re wondering how to remove air from your pool pump, you’ve come to the right place.

Why is there air in the pool pump?

Before we delve into the steps to resolve this issue, it’s essential to understand why air might be present in your pool pump in the first place. There are a few common reasons why air can enter the system:

  • Leaks: If there are any leaks in the pool pump’s suction line or the lid of the strainer basket, air can infiltrate the system.
  • Low water level: If the water level in your pool is too low, it can lead to the pump sucking in air along with water.
  • Clogged impeller: A clogged impeller can disrupt the flow of water, causing it to mix with air and create bubbles within the pump.
  • Damaged O-rings or gaskets: Faulty or worn-out O-rings and gaskets can also allow air to enter the pump system.

Steps to remove air from your pool pump

Now that we’ve identified the potential causes, let’s walk through the step-by-step process to remove air from your pool pump:

1. Check for leaks

Inspect the suction side of your pool pump, including the lid of the strainer basket, fittings, and valves. Look for any visible signs of leaks, such as water dripping or loose connections. Tighten any loose fittings and replace damaged components as necessary.

2. Ensure proper water level

Make sure the water level in your pool is at the appropriate level indicated by the manufacturer. If it’s too low, add water until it reaches the recommended height. This helps maintain a consistent flow of water to the pump and reduces the likelihood of air being drawn in.

3. Clean the strainer basket and impeller

If your pool pump’s strainer basket or impeller is clogged with debris, it can obstruct the water flow and cause air to become trapped. Turn off the pump and open the lid of the strainer basket. Remove any debris, leaves, or other foreign objects that may be blocking the flow of water. Additionally, inspect the impeller and clean it thoroughly to ensure it rotates freely.

4. Inspect O-rings and gaskets

Check the O-rings and gaskets on both the suction and discharge sides of the pump. Over time, these components can deteriorate or become damaged, allowing air to seep in. Replace any worn-out or faulty O-rings and gaskets to create a tight seal and prevent air leaks.

5. Prime the pump

If you have followed the previous steps and continue to have air in your pool pump, you may need to prime it. Priming the pump involves manually forcing water into the pump to eliminate any air pockets. Consult your pump’s user manual for specific instructions on how to prime it, as the process can vary depending on the model.

6. Monitor for further air entry

After going through the above steps, it’s crucial to monitor your pool pump for any recurring air entry. Regularly check for leaks, ensure a proper water level, and conduct routine maintenance to prevent future air-related issues.

Learning how to remove air from your pool pump is an essential skill for any pool owner. By following the steps outlined above and addressing potential causes such as leaks, low water levels, clogged impellers, and damaged O-rings or gaskets, you can eliminate air bubbles in your pool pump system. Remember to consult your pump’s user manual for specific instructions and reach out to a professional if you’re unsure or need further assistance. Enjoy your air-free, smoothly operating pool pump and continue enjoying your refreshing pool!

Leave a Reply

Your email address will not be published. Required fields are marked *