Easy Steps to Remove Anti Glare Coating from Glasses

If you have glasses that have anti-glare coating, you might have noticed that over time that coating is wearing off. Not only does this make your glasses look unattractive, but it also affects your visibility. In this article, we’ll discuss several ways to remove anti-glare coating from glasses so that you can have a clear view and an attractive appearance.

What is Anti-Glare Coating?

Before we go into the methods of removing anti-glare coating, let’s first understand what it is and why it is used. Anti-glare coating is a thin layer of coating applied to eyewear lenses to reduce reflective light and prevent glare. It improves vision by reducing light reflection and makes it easier to see in bright light. Anti-glare coating also improves the aesthetic appearance of glasses, making them look more attractive and stylish.

Why do you Need to Remove Anti-Glare Coating from Glasses?

While anti-glare coating is a fantastic addition to glasses, it can start to wear off after months or years of use. The coating can become scratched, chipped or cloudy over time, making it difficult to see through your lenses. This can cause discomfort and eye strain, ultimately defeating the purpose of your glasses. So, it becomes necessary to remove the anti-glare coating from your glasses so that you can have a clear view.

Things to keep in mind before Removing the Anti-Glare Coating from Glasses

Before you start the process of removing the anti-glare coating from your glasses, there are a few things that you need to keep in mind. Firstly, some methods can damage your lenses, so you need to be careful and follow the instructions carefully. Secondly, always use good quality products so that you don’t end up damaging your glasses. Lastly, if you are not confident in removing the coating yourself, it is best to take your glasses to a professional optician.

How to Remove Anti-Glare Coating from Glasses

Here are some methods that you can try to remove anti-glare coating from glasses:

Using Rubbing Alcohol

Rubbing alcohol is a household item that can work wonders in removing anti-glare coating from your glasses. You will need to follow these steps:

  • Clean your glasses with mild soap and warm water. Dry them off with a clean microfiber cloth.
  • Put rubbing alcohol on a cotton ball and dab it onto the lenses. Ensure that the entire lens is covered.
  • Leave the lenses to soak for 30 seconds or so.
  • Take a soft microfiber cloth and start rubbing the lens gently. You should start noticing that the coating is coming off.
  • Carry on rubbing until all of the coating has been removed. Your lenses may be hazy at first, but they will clear up after washing them with water and drying them off with a microfiber cloth.

Using Baking Soda

Baking soda is another item that is effective in removing anti-glare coating from glasses. Here’s how you can use it:

  • Mix baking soda into a small bowl of water to create a thick paste.
  • Use a soft-bristled brush or a microfiber cloth to apply the paste onto the lenses gently. Ensure that you cover the entire lens.
  • Leave the paste on for about 20 minutes.
  • Rinse the lenses with water and dry them off with a microfiber cloth.
  • If there is any residue left on the lenses, clean them again with soap and water.

Using a Cooking Spray

Yes, you heard it right, cooking spray can help you remove anti-glare coating from glasses as well. You can follow these steps:

  • Clean your glasses with mild soap and warm water. Dry them off with a clean microfiber cloth.
  • Put some cooking spray onto a microfiber cloth and apply it to the lenses gently. Ensure that the entire lens is covered.
  • Leave the lenses for about 5 minutes. Meanwhile, heat some water in a pot or a bowl.
  • Take your glasses and rinse them with warm water.
  • Use a microfiber cloth to dry the lenses, and you’ll notice that the anti-glare coating has been removed.

Using Acetone

Acetone is a common ingredient found in nail polish removers that can help you remove anti-glare coating from glasses as well. However, this method may not be suitable for all lenses, so be sure to check with your optician before attempting this.

  • Clean your glasses with mild soap and warm water. Dry them off with a clean microfiber cloth.
  • Apply acetone on a microfiber cloth and rub it gently onto the lenses. Ensure that you cover the entire lens.
  • Leave the acetone on for about a minute or so
  • Use warm water to rinse the lenses and dry them off with a microfiber cloth. You’ll notice that the coating has been removed.

Conclusion

Removing anti-glare coating from glasses is not as difficult as it seems, provided you have the right tools and products. You can try any of these methods mentioned above and choose the one that works best for you. However, be sure to exercise care and caution to prevent any damage to your glasses. Remember, you can always take your glasses to a professional optician if you are not confident in removing the coating yourself. So, go on and try these methods and have clear, unobstructed vision once again.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *