Remove Anti Glare Coating Easily from Your Plastic Glasses

Anti-glare coating on glasses is a great invention as it reduces eyestrain and glare, making it easier to see. It is a thin layer that is applied to the surface of plastic eyeglasses, which then allows the wearer to see more clearly. However, there are times when it becomes necessary to remove this coating. Reasons could vary from scratches on the coating, which impairs vision, or simply, a wearer’s preference. Removing the coating is not always easy, but with the right tools and steps, it can be done.

Why remove anti-glare coating from plastic glasses?

The reasons for removing the coating could be various, such as scratches and impairments to vision. The weakening of the layer could result in the coating having a cloudy appearance, and the spray used to clean them may also have negative effects on the layer. This makes the coating susceptible to damage, making it necessary to remove it, either partially or entirely.

Tools needed to remove anti-glare coating from plastic glasses

The task requires some specific tools that you must have ready before you begin:

  • Acetone/Nail polish remover.
  • Cotton swabs.
  • Soap and water.
  • Mild abrasive such as baking soda, toothpaste, or baking powder.
  • A rubber or plastic spatula
  • A container for the acetone. Using a plastic container would be best since acetone dissolves plastic containers.
  • A soft cloth for wiping the glasses.
  • Paper towels.

Removing anti-glare coating from plastic glasses

Anti-glare coating on plastic eyeglasses may be removed using different methods. Some of the most popular methods include using the abrasive cleaners, chemicals, boiling water, and using a rubber or plastic spatula. All of these methods work, but some may take longer than others.

Method 1: Using acetone/nail polish remover

Acetone is an excellent solvent for dissolving the coating on plastic eyeglasses. You will require a container for the acetone and cotton swabs to apply it to the glasses. Put some of the acetone into the container. Dip the cotton swab into the acetone and apply it to the coated lens area. Then, using a spatula or another long, flat tool, scrape the coating gently off the lens. Cotton swabs should be used to remove the coating remnants. Continue applying acetone and scraping away until all the coating is removed from the lens.

Method 2: Using soap and water and a mild abrasive

Another effortless way to remove the coating is to use soap and water. Start by running the glasses under warm water and applying a squirt of soap to both sides of each lens. Then, take a soft-bristled brush and gently brush the lens with the soap and water. Be careful not to scrub too hard, but instead, be gentle and smooth with the brush. Next, rinse the lenses under warm water and look to see if any coating is still present. If it is, try the process again. If, after two attempts, the coating fails to come off, try using a mild abrasive such as baking soda, toothpaste, or baking powder.

Method 3: Using boiling water

One of the more traditional methods for cleaning eyeglasses is to use boiling water. This method works on both coated and non-coated lenses. Boil the water, then dip the glasses in the water for about a minute, making sure that both lenses are completely submerged. Carefully remove them from the boiling water with tongs and quickly rinse them under cold water. Towel dry and check for any coating the lens may still have. If it still has residual coating, repeat the process until it has been removed completely.

Method 4: Using a rubber or plastic spatula

This is a less time-consuming and cheaper option for removing the coat. Simply hold the glasses in one hand and a rubber spatula in the other. Scrape the coating gently from the glasses surface with the rubber spatula until the coating has been completely removed. Once this is done, rinse the lenses thoroughly with soap and water, then dry them with a soft cloth.

Conclusion

Removing anti-glare coating from plastic glasses can seem a daunting task, but with the right information and tools, you’ll be able to successfully complete the process and restore your glasses to their prime. Make sure to be gentle and take your time with whichever method you choose. Take frequent breaks to avoid straining your eyes and avoid using anything that could cause damage to your glasses or pose a health risk to you.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *