Bestop soft tops are a popular choice for Jeep Wrangler owners who are looking for an easy and convenient way to enjoy the open-air experience. However, there may come a time when you need to remove the soft top, whether it’s to replace it with a hardtop or simply to clean it. In this article, we will walk you through the step-by-step process of removing a Bestop soft top from your Jeep Wrangler.

Gather the Necessary Tools

Before you begin removing the Bestop soft top from your Jeep Wrangler, make sure you have all the necessary tools on hand. You will need a soft top removal kit, which typically includes a screwdriver, sockets, ratchet, and possibly a drill. Additionally, having a helper can make the process much easier and safer.

Step 1: Lowering the Soft Top

The first step is to lower the soft top on your Jeep Wrangler into the open position. Unlatch the top at the windshield header by releasing the latches on both sides. Then, fold the top back, starting from the windshield all the way to the back of the vehicle. Secure the folded top with the provided straps or bungee cords.

Step 2: Removing the Bow Assembly

Next, you’ll need to remove the bow assembly from the Bestop soft top. This assembly consists of the bows that provide structure to the top. Locate the screws or bolts that secure the bows to the Jeep’s roll bars and windshield frame. Use the appropriate tools to remove these fasteners and set them aside for reinstallation later.

Step 3: Detaching the Side and Rear Windows

Once the bow assembly is removed, you can move on to detaching the side and rear windows from the Bestop soft top. Carefully unzip the windows and remove them from their respective channels. Be sure to handle the windows with care to avoid any damage. Set the windows aside in a safe place.

Step 4: Unfastening the Top from the Tailgate

Now, it’s time to unfasten the rear portion of the Bestop soft top from the tailgate. Locate the retaining clips or straps that secure the top to the tailgate and release them. You may need to use a screwdriver or another tool to disengage the clips or straps. Once released, carefully lift the rear portion of the top off the tailgate, taking care not to scratch the paint.

Step 5: Removing the Top from the Side Rails

The final step is to remove the remaining portion of the Bestop soft top from the side rails of your Jeep Wrangler. This is where having a helper can come in handy. Starting from one side, carefully release the top from the side rails by disengaging the clips or straps. Work your way to the other side, ensuring that the top is completely released from the rails. Once detached, carefully lift the top off the vehicle and set it aside.

With these 5 easy steps, you can successfully remove the Bestop soft top from your Jeep Wrangler. Remember to keep all the hardware and components in a safe place for future use or reinstallation. Whether you’re swapping tops or giving your Jeep a thorough clean, removing the soft top is a necessary skill for any Wrangler owner.

Leave a Reply

Your email address will not be published. Required fields are marked *