How to Remove Ray Ban Lenses: A Step-by-Step Guide

If you own a pair of Ray Ban sunglasses, you know how valuable they can be. However, there may come a time when the lenses need to be replaced. Removing Ray Ban lenses can be tricky without causing damage to the frames. In this article, we will show you how to safely and easily remove Ray Ban lenses.

Why remove Ray Ban lenses?

There are several reasons why you may need to remove the lenses from your Ray Ban sunglasses. Perhaps they have become scratched or damaged, or maybe you want to replace them with prescription lenses. Alternatively, you might just want to give your sunglasses a thorough cleaning.

Whatever the reason, taking the lenses out of Ray Bans can be a difficult process, especially if you have never done it before. Not to worry – with our step-by-step guide, you can easily remove Ray Ban lenses without causing any damage to the frame.

Materials you will need

Before you start removing the lenses, you will need to gather a few materials. Fortunately, you won’t need anything too specialized – most of the items you need will probably be lying around your house.

  • Soft, lint-free cloth
  • Small screwdriver (flat-head)
  • Safety pins

With these tools in hand, you’re ready to start removing your Ray Ban lenses. Let’s begin.

Step-by-step guide to removing Ray Ban lenses

Follow these simple steps to remove your Ray Ban lenses without damaging the frame:

Step 1: Prepare your workspace

It is important to make sure you have a clean, flat surface to work on before you begin. Covering the surface with a soft cloth or towel can help prevent scratches or damage to the frame.

Step 2: Locate the screw

Locate the small screw on the temple of your Ray Ban sunglasses. Using a small flat-head screwdriver, carefully unscrew it and place it in a secure location, so you don’t lose it.

Step 3: Remove the rubber cap

Next, use a safety pin to remove the rubber cap on the temple of the sunglasses. This should reveal a small hinge mechanism underneath.

Step 4: Release the lens

Now it’s time to release the lens. Gently push the lens up and away from the frame, using your fingers to apply pressure. This should cause the lens to pop out of its socket. If the lens still feels difficult to remove, you can use a plastic spoon or similar object to gently pry it away from the frame.

Step 5: Repeat on the other side

Once you have removed one lens, repeat the process with the other side of the sunglasses. Make sure to keep the lenses in a safe location, so they don’t become scratched or damaged.

Step 6: Clean the frames

Now that you have successfully removed the lenses, you can clean the frames with a soft, lint-free cloth. This will remove any dirt or grime that may have accumulated while you were wearing your sunglasses.


Removing Ray Ban lenses can be a daunting task, but with the right tools and a little patience, it can be done safely and easily. Remember to take your time and work carefully to avoid damaging your sunglasses. With our step-by-step guide, you can keep your Ray Ban sunglasses looking great for years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *